Hemi Dart Clutch Issues

The Butch Leal Hemi Duster has the mod to the clutch pedal and the clutch shaft (TTi) frame position has been relocated (slightly) to match the modified bellhousing mount.
It has plenty of pedal and no flexing. It does have brackets that attach the frame to a brackets on a modified scattershield to act as a mid-plate and the motor has elephant ears.

I also just added a hydraulic clutch / twin disc Mccloud ram clutch/ pressure plate to a 72 Dart / FHO Hemi (StageII) build. I do not see any way possible without doing some minor modification to your firewall and fenderwell. The firewall needed to be slightly modified to mount the "universal" hydraulic clutch slave cylinder bracket and the fenderwell had to be "dented" to clear the fitting / line that goes to the throw-out bearing. There is a procedure when installing the throw out to make sure it rides approx .250 off the pressure plate.

For a more period correct look and no firewall and fenderwell mods....I would recommend the TTi clutch crossshaft with minor component mods in lieu of body mods.