68 Dart Project.
Thanks! Yes I make sure to get something done each day. Today I fab'd up the fuel cell braces and did some finishing In that fuel cell area, both in the trunk and underneath.
Fuel cell and brackets for the Dart.
This is the trunk of the old 64. Same strap set up. Nothing moves even during 1.38 60's.
A crappy pic, but the bottom of the Dart is pretty much ready for a good coat on Epoxy primer, then high build to follow, wet on wet. Priming is quite a ways down the road though...
Still have to build in a drive shaft hoop, need to do some measurements. The transmission though, it's done and waiting.
This is from my buddies 68 GTX. Has 4-gear planetaries. Trans bracket made the job easier.
Rebuilt, ready and waiting. Did this last winter.
Who remembers these old Hurst shifters. Hurst Auto stick II. Early to mid 70's. This will be home in the Dart.
---
Thanks! Yes I make sure to get something done each day. Today I fab'd up the fuel cell braces and did some finishing In that fuel cell area, both in the trunk and underneath.
Fuel cell and brackets for the Dart.
This is the trunk of the old 64. Same strap set up. Nothing moves even during 1.38 60's.
A crappy pic, but the bottom of the Dart is pretty much ready for a good coat on Epoxy primer, then high build to follow, wet on wet. Priming is quite a ways down the road though...
Still have to build in a drive shaft hoop, need to do some measurements. The transmission though, it's done and waiting.
This is from my buddies 68 GTX. Has 4-gear planetaries. Trans bracket made the job easier.
Rebuilt, ready and waiting. Did this last winter.
Who remembers these old Hurst shifters. Hurst Auto stick II. Early to mid 70's. This will be home in the Dart.
