Torque cam for 318 2bbl

Member Dartfreak75 has been going through this for the same combo: 302 on a stock 318 LA bottom end, trying to not kill low-mid RPM torque with too big of a cam. IIRC, current plan is for a Lunati Voodoo 70020701. There is one step smaller VooDoo cam that might be good for you too, with the 2 BBL. With your step-up in compression with the 302 heads and not too big a cam, you're gonna have a nice driving combination.

VooDoo' are pretty fast rate for off-the-shelf flat tappet cams, so follow the proper break-in procedures carefully, and make sure your oil has adequate levels of ZDDP.