Who runs this cam?

SSG_Karg said
Pistons are el cheapo cast replacements about a country mile down in the hole. Heads are 2.02/1.60 factory Js. Gasket matched, 1.6 rockers. Compression has not been measured but all cylinders show at least 130 psi with current Comp 280H cam.
Plan is to shave heads .060, Mr. Gaskets 1128G, and maybe install the cam 4* advanced.
Click to expand...
LOL on the country mile.... Good deal.... sounds like a good plan to me for a simple 318 build. Cam installed as ground, with the ICL at 104, the ICA is at 57-58 degrees..... gets DCR up into the 7.2-7.3 range with those heads milled.... a tad more than a stock 318 in the low RPM's.