Alignment 18" wheels

72bluNblu said
Having 18" wheels shouldn't have anything to do with getting the alignment right. Shouldn't make a lick a difference compared to a 15" wheel.

Now, radial tires vs. bias ply's changes the specifications you should set the alignment to. But even that shouldn't effect actually getting the car to drive straight.

For radials you should be using alignment specs for radial tires, not the factory settings (which are for bias ply tires). You should base your alignment specs off of this chart
View attachment 1715250007

If you haven't replaced your suspension bushings, consider using the Moog K7103 offset UCA bushings to increase the amount of caster you can get because it's hard to get more than a couple degrees with the stock parts.

And yes, I have 18's and had no issues getting my car to drive straight.
View attachment 1715250008

I've had the 18s for a while. Ya. Just leterrally did all bushing inner outer tie rods ball joints strut rod and so on. Literally everything. I'll take your chart to them and have them do it again to these specs. I know it should drive fine. But figured it d ask. Since I had them alighn it right before I rebuilt front end and after it's only a little better and still pulled hard right