1972 Duster Build with my Daughter
Finished wet sanding the clear. Here is the process. I use 500 grit wet to get the orange peal out. Notice I missed some here so I went after it with the 500 again...
Now go after it with 1000 grit wet use at least one piece per panel it stops cutting very quickly..
Lastly hit it with 1500 wet... and it is ready to buff.
Finished up the rest of the side. The door was already buffed but I missed a few orange peel craters so I hit it with 500 grit wet again to get them out. Then 1000 and 1500 wet.
Finished wet sanding the clear. Here is the process. I use 500 grit wet to get the orange peal out. Notice I missed some here so I went after it with the 500 again...
Now go after it with 1000 grit wet use at least one piece per panel it stops cutting very quickly..
Lastly hit it with 1500 wet... and it is ready to buff.
Finished up the rest of the side. The door was already buffed but I missed a few orange peel craters so I hit it with 500 grit wet again to get them out. Then 1000 and 1500 wet.
