Pcv hook up on FI Tech go street efi system
Yes-but in an early abody with an LD340 intake hood clearance is super tight. I had to run a factory 4bbl chrome top and cut the back off and use a different base plate to make work. Here is a picture of the cut before sending out for rechrome. The cut allows for clearance of the fuel lines (pressure and return) when you drop the filter height to 2” x10” from the factory 3”x10” the photo s from my truck on the way to rechrome. Very tight but with a vintage air ac compressor and brackets a larger air filter 3”x14” will not fit. Hits the back of the compressor. But that’s “Hot rodding” right?
Thanks again for the reply.
Joe
Yes-but in an early abody with an LD340 intake hood clearance is super tight. I had to run a factory 4bbl chrome top and cut the back off and use a different base plate to make work. Here is a picture of the cut before sending out for rechrome. The cut allows for clearance of the fuel lines (pressure and return) when you drop the filter height to 2” x10” from the factory 3”x10” the photo s from my truck on the way to rechrome. Very tight but with a vintage air ac compressor and brackets a larger air filter 3”x14” will not fit. Hits the back of the compressor. But that’s “Hot rodding” right?
Thanks again for the reply.
Joe