Pre-Bent Brake Lines

-
Arron tate

Arron tate

T B L
Joined
Sep 12, 2018
Messages
495
Reaction score
449
Location
USA
Hello All
Looking for a source that sells Pre-Bent Brake Lines that are OEM looking and fitting.
Need all the under hood lines to fit a 1973 A body 340 Duster.
Also looking for info on a rebuilding kit Or does any one provide a rebuild service for the proportioning valve.
Is there a source for new OEM type proportioning valve ? (not cheep china type).
Happy Mopar :)
Thanks in advance.
Arron
 
I put all new pre-bent stainless lines from classic industries in my '68 notchback this spring, they fit great and I was somehow magically able to install them with the entire still in place. Hardest part was hooking everything up to the distribution block.
 
Got mine from Dr Diff. They fit very well with only slight tweaking needed.
 
Hello All,
Thanks for the overwhelming support in finding the lines.
Lots of good leads.
Now to question two.
"looking for info on a rebuilding kit Or does any one provide a rebuild service for the proportioning valve.
Is there a source for new OEM type proportioning valve ? (not cheep china type)".
I see in Dr Diff they sell a Repo type valve. Is this the cheep china type?
I here that the china ones are junk.
Any comments will help.
Happy Mopar :)
Thanks in advance.
Arron
 
Last edited:
I don't think there's really any value in rebuilding a proportioning valve. There must be good new (or used) ones out there. I avoid China parts as much as possible, not just for quality issues.....I'll save you from my "rant" on slave labor, and the beneficiaries of it.
 
I would add a vote for Inline Tube. I ordered all of my brake and fuel lines for my 69 Dart and everything went together very nicely.
 
I worked on a 69 Dart 340 Swinger. Used Inline Tube for all the steel lines. Fit beautifully. Used their distribution block as well. Not sure of the country of origin, but, fit and works flawlessly.
 
you can bend your own for pennies.Just pre measure and buy correct length flared pieces which are easy to bend.
....but the front passenger side line can be a challenge!
 
Hello All,
The reason I am asking about rebuilding a proportioning valve is that I have a KH.
Most suppliers show the brass proportioning valve.
I have the KH cast version and in trying to keep with as stock (OEM) i perfer to reuse mine.
Thanks ZKX 14 for the info, They are the first I have seen that offer some rebuild parts.
Thanks to everyone ,
Happy Mopar:)
Arron
DR Dif valve.jpg

kh-86652.jpg
 
Last edited:
Online Tube .Used them on my70 Cutlass S build as well as my 69 Dart GT and will use on my 78 Z28 as well.

Arron tate said:
Hello All
Looking for a source that sells Pre-Bent Brake Lines that are OEM looking and fitting.
Need all the under hood lines to fit a 1973 A body 340 Duster.
Also looking for info on a rebuilding kit Or does any one provide a rebuild service for the proportioning valve.
Is there a source for new OEM type proportioning valve ? (not cheep china type).
Happy Mopar :)
Thanks in advance.
Arron
Click to expand...
 
You must log in or register to reply here.
-

Back
Top