Dart/Barracuda Big block 383 manifolds. 67 vs 68-69 and Exhaust systems

-

mad-car-disease

Well-Known Member
Joined
May 1, 2010
Messages
56
Reaction score
33
Does anyone have a side by side picture of the differences between a 1967 2899002 drivers manifold vs 1968/69 2949729 drivers manifold. I want to buy exhaust for my 68 barracuda and I think I have the 2899002. Just need to understand the differences before I pull the exhaust trigger.

Also have thoughts on the Ebay system below vs Accurate besides cost?

1968 PLYMOUTH BARRACUDA, VALIANT & SIGNET EXHAUST, ALUMINIZED, WITH 383 ENGINES | eBay

Thanks everyone for the info.
 
Same exhaust system on both manifolds except 67 did not have chrome tips, just turn downs.
 
The "E Bay" listing shows what it should fit, 225 /6 , all the way to a 426!!! makes me wonder what you get.
 
It looks like most of their dual systems are $450 and single systems are $290 no matter what make or model. All the part numbers are Walker part numbers, not sure if that's what you get or it is just reference.
 
It looks like most of their dual systems are $450 and single systems are $290 no matter what make or model. All the part numbers are Walker part numbers, not sure if that's what you get or it is just reference.


Thanks for pointing that out, I missed the walker part number...... they may not be bad if they are old walker parts. i just hate to throw money away if they fit like junk. I am thinking better parts at ACCurate but at twice the price and my car is a driver not a show car.
 
I believe that the '67 left side has a different exit angle than the '68-9. I bought the accurate system. They are expensive but it was important to me that it be "correct" and high quality. They required L&R manifold casting numbers before ordering because of the differences in the years. They have collected NOS pieces from which they have patterned their production. Am very happy with mine.
 
-
Back
Top