[FOR SALE] 408 parts

-
Status
Not open for further replies.
M

MoparMan65

Well-Known Member
Joined
Apr 1, 2017
Messages
62
Reaction score
3
Location
Philpot Ky
Rating - 100%
1   0   0
Contact seller
All parts came out of running motor... only reason selling due to going another direction. Some parts may need minor work (polishing on journals) but all parts are in good working condition with no known issues. Everything is practically brand new with very limited run time with the exception of pistons and rods. Also this motor is still together and will wait for possible sell before tearing apart. Will sell as whole engine but shipped on buyers dime. First come first serve no holds!! This combo ran high 6.90 passes in 1/8 in a 3800# dakota.


Complete rotating assembly $2000
All balanced and ready to go.
Forged scat 4" crank
Probe forged .030 pistons
Eagle H beam rods with arp 2000 bolts
Harmonic dampener and flywheel for internal balanced.

Eddy heads for magnum block $1500
Springs good to 650
New guides
New valves and seals
Crane roller rockers
Some port work no ##
Ready to run

Push rods and lifters $450
Comp cams push rods factory length
Rhodes vmax lifters hyd roller. These were not cheap!!

M1 intake. SOLD
Msd distributor $150
Holley 750 double pumper$250
LA block with arp studs head and mains. $400 no issues.

Also have camshaft with double roller chain but do not have the specs with me

Again all parts are in good working condition and most are new with minor run time. All prices are negotiable.

Will only take PayPal.
I'm sure I might have missed somethings and will get more pictures upon request any questions just ask. Location is Pholpot, KY 42366
 
Last edited:
Pictures might help lol!!

20160529_024446.jpg


20160430_021911.jpg


20160430_021839.jpg


20160529_024513.jpg


20160403_203854.jpg
 
I'm interested in the M1 intake. Got any other pictures? Will it work with the OE magnum serpentine setup?
 
Seconds on the intake please.
It does appear to be correct for Magnum serpentine setups, based on the thermostat position and straight bypass hose fitting.
 
PM sent, interested in complete motor. THX


MoparMan65 said:
All parts came out of running motor... only reason selling due to going another direction. Some parts may need minor work (polishing on journals) but all parts are in good working condition with no known issues. Everything is practically brand new with very limited run time with the exception of pistons and rods. Also this motor is still together and will wait for possible sell before tearing apart. Will sell as whole engine but shipped on buyers dime. First come first serve no holds!! This combo ran high 6.90 passes in 1/8 in a 3800# dakota.

Complete motor carb to pan $4500

Complete rotating assembly $2000
All balances and ready to go.
Forged scat 4" crank
Ross forged .030 pistons
Eagle H beam rods with arp 2000 bolts
Harmonic dampener and flywheel for internal balanced.

Eddy heads for magnum block $1500
Springs good to 650
New guides
New valves and seals
Crane roller rockers
Some port work no ##
Ready to run

Push rods and lifters $450
Comp cams push rods factory length
Rhodes vmax lifters hyd roller. These were not cheap!!

M1 intake $200
Msd distributor $150
Holley 750 double pumper$250
LA block with arp studs head and mains. $400 no issues.

Also have camshaft with double roller chain but do not have the specs with me

Again all parts are in good working condition and most are new with minor run time. All prices are negotiable.

Will only take PayPal.
I'm sure I might have missed somethings and will get more pictures upon request any questions just ask. Location is Philpot, KY 42366 View attachment 1715251304 View attachment 1715251304 View attachment 1715251304 View attachment 1715251305 View attachment 1715251304 View attachment 1715251305
Click to expand...
 
Ok guys sorry for all the delays but I finally got the whole motor apart and everything looks good nothing bad here. Took a bunch pictures taking it apart and of each major part I've got so just PM me for details. I need this stuff gone asap as it takes up a lot more room now lol.

20181123_135835.jpg


20181123_135842.jpg


20181123_134748.jpg


20181123_134754.jpg


20181123_123843.jpg
 
Update Update Update!!!!!!!!!!


Complete rotating assembly $2000
All balanced and ready to go.
Forged scat 4" crank
Probe forged .030 pistons
Eagle H beam rods with arp 2000 bolts
Harmonic dampener and flywheel for internal balanced.


Camshaft - will come with vmax lifters, new billet double roller timing chain. $500
Msd distributor $150
Holley 750 double pumper $300
LA block with arp mains studs. $400 no issues.

Again all parts are in good working condition and most are new with minor run time. All prices are negotiable.

Will only take PayPal.
I'm sure I might have missed somethings and will get more pictures upon request a
 
MoparMan65 said:
Update Update Update!!!!!!!!!!


Complete rotating assembly $2000
All balanced and ready to go.
Forged scat 4" crank
Probe forged .030 pistons
Eagle H beam rods with arp 2000 bolts
Harmonic dampener and flywheel for internal balanced.


Camshaft - will come with vmax lifters, new billet double roller timing chain. $500
Msd distributor $150
Holley 750 double pumper $300
LA block with arp mains studs. $400 no issues.

Again all parts are in good working condition and most are new with minor run time. All prices are negotiable.

Will only take PayPal.
I'm sure I might have missed somethings and will get more pictures upon request a
Click to expand...
pm sent
 
Status
Not open for further replies.
-

Back
Top