No charge

AJ is correct

What do you mean "bypass everything?" Just exactly what are you bypassing?

START by going to MyMopar and downloading the closest thing to the correct service manual and wiring diagram on that site

If you are jumpering to the field (push on/ flag terminal) on the alternator, you have bypassed the voltage regulator. To check the wiring in that circuit, disconnect the VR and jumper those two wires together, and see if it again charges. If so MAKE CERTAIN the VR is actually grounded, and if so, and it still does not charge, replace the VR

The dark blue wire going to the IGN terminal on the VR should have "same as battery" with key in the "run" position

You made any wiring changes lately?