New to the forum, Anyone know the wheel specs on this rms Dart?

-

Colton Wilmouth

New Member
Joined
Dec 2, 2018
Messages
2
Reaction score
2
Location
Ocean City Maryland
Hey guys,

I am new to this forum, and joined specifically to see if anyone could tell me the wheel/tire specs for the Reilly Motorsports '69 Dodge Dart. I am building a '67 and want the same look so far as the wheels and tires go. If anyone is interested in following the build, just check out West O Auto (@west_o_auto on ig. a,d @westoautomd on facebook). It is basically getting a full restoration, and a turbo ls mated to a 5 speed 30a transmission from a 300zx. The build is progressing quickly, the fenders are currently getting prepped and primed, I started on the new quarter skins today, and the engine and trans are set in the car with the trans tunnel cut out for clearance, ready for mounts.

Thanks!
rms4-650x433.jpg

47166021_2155010724755045_3103925749027962880_o.jpg?_nc_cat=102&_nc_ht=scontent-atl3-1.jpg

46785123_2151475565108561_5123523554628861952_o.jpg?_nc_cat=103&_nc_ht=scontent-atl3-1.jpg
 
I seem to remember Joe saying they were special order from wheel vintiques or compton wheel, something like that
 
Hey guys,

I am new to this forum, and joined specifically to see if anyone could tell me the wheel/tire specs for the Reilly Motorsports '69 Dodge Dart. I am building a '67 and want the same look so far as the wheels and tires go. If anyone is interested in following the build, just check out West O Auto (@west_o_auto on ig. a,d @westoautomd on facebook). It is basically getting a full restoration, and a turbo ls mated to a 5 speed 30a transmission from a 300zx. The build is progressing quickly, the fenders are currently getting prepped and primed, I started on the new quarter skins today, and the engine and trans are set in the car with the trans tunnel cut out for clearance, ready for mounts.

Thanks!
View attachment 1715256464
View attachment 1715256465
View attachment 1715256466
They are circle racing wheels. Made for a 11" Ford Chevy cap. When I priced them out they were about 800+ a piece.

35.jpeg


I wanted a Chrysler wheel that I could have a poverty cap on if I wanted. I have a freind in the wheel business. So I had some one offs made.

1100.jpeg


IMG_20181027_125917580.jpg
 
-
Back
Top