408 stroker cam recommendations

Honestly I leave cam choice to people who do it for a living. I also go to someone that is recommended by people who run similar combinations as I do. With that said my advice is about the rest of the combo. First just as it was stated above what’s your goal? If your budget only allows a “little bit at a time build” you won’t be running perfectly match components until the final upgrades are made. If you build your shortblock to your end hp goals it is then easier to put together the top end a little bit at a time. The problem is a stock head is pretty limited in max lift and bigger valve springs choices. So do you throw a cam in it that will work within the limitations of you stock head choice knowing it is temporary? If it were mine and the 360 heads are mechanically sound I would get a “temp” cam to throw in it. Knowing that when I have gotten all the other things upgraded in the car/motor I will need to change cams, but at that point I can go to someone like Bullet and say this is what I have.......grind me a cam. It allows you to enjoy the car while still working towards your goal. The head probably won’t allow you to pick the cam your going to run “forever”. Say you think you are going to run an eddy rpm aluminum head and pick a cam for that, but when you get to the point of buying heads you go with one of the w’s.