DACCO 762 Torque Converter bolt alignment problem Slant six

Mopar King said

I tried spinning the converter by hand as I watch the flexplate holes which I have it in a way that i can see 2 out of the 4 holes. I can only get 1 hole perfect but the 2nd one is off at a angle and the other 2 are 1/2 visible or not visible at all.

Click to expand...

Use the same point on the flexplate. Put a bolt in. If the second hole isn't lined up, pull the bolt rotate the converter one hole and put a bolt in. Check the next hole if it isn't lined up rinse and repeat.

It will only line up one way, you have 4 combos to try.