Low Cost DIY Rod Weighing Setup

no love with the small .1g scale. Revised table with risers inline with centerlines did not help, although it lowered the little end weight from 265 to 223! That was expected as the big end was supported closer to the little end. Big end was more difficult to weigh I got a 10g variance but Im thinking its closer to 499 than anything...but the total rod weight is unchanged at 753? Will try the 1g scale again. Who needs .1g resolution anyway! Ill spare the boring video, although the little end was highly repeatable within .4g. My hunch is the bearing support socket is causing side load again. Gonna run a full roller next....and the beat goes on...