Anyone know what these fittings are called and where to buy them?

-
R

Rocket

FABO Gold Member
FABO Gold Member
Joined
Apr 22, 2005
Messages
2,823
Reaction score
853
Location
U.S.A.
i am in need of two of these slide on fittings to finish up a carb linkage set up. These slide on a 1/4” diameter rod and attach to the carb at one end and the throttle lever at the other end. A set screw holds it in place along the rod and a wire clip holds it in on the other side. I prefer not to switch to heim ends at this time.
Any insight is appreciated

4C91B375-35C5-4203-B753-3BA03C74A8A8.jpeg


6253B069-9156-4049-B9E9-E569289C707C.jpeg
 
Do you mean one of these? I get them from a nut and bolt place that has auto hardware. Don't know what you are talking about set screw.

clip.jpg
 
This is carb linkage stuff. This is not factory but is aftermarket/ "universal" stuff. I have not seen individual parts available. Good luck.
 
Try carb rebuilders. They may likely have large quantities of carb related hardware. One I know of is in Texas, goes by name/avatar "carmantx" on V8buick.com site.
 
Great recommmendation. I will order those Mr. Gasket parts.
 
You must log in or register to reply here.
-

Back
Top