Another fix with JB weld

JBWeld is the shiznit!!!!!

When I was working ammonia refrigeration, I used it to "fix" a stripped out head-bolt on an old Vilter piston-type ammonia compressor. Bolt size was 1 1/8", hole in the block was stripped out....drilled the hole out to remove all remaining threads, cleaned the hole with solvent and blown out with air gun, then completely filled the hole with JBWeld and let it set and cure for three days. Came back, marked the center of the hole and re-drilled and tapped it out. Re-installed the head and torqued the bolts down to 195 lbs....and that compressor is still running to this day.