[SOLD] 1973 Duster parts car, will cut small patches

-
Status
Not open for further replies.
813Demon340

813Demon340

Well-Known Member
Joined
May 14, 2010
Messages
1,155
Reaction score
131
Location
Northern Nevada
Rating - 100%
14   0   0
Contact seller
I have a 1973 Duster Parts car. Mostly a shell, most of the interior gone, floors rusted. Rust free trunk floor and spare tire well. Nice decklid,rear bumper, non a/c heater box, side windows, door striker area, tail lights, rear view mirror, etc. Willing to cut small patch panels for very reasonable prices if needed. Car won't be around long. I'm keeping the K frame and rear end. I'll sell the whole body for $200 Located in Reno NV 89511
PM or get my email from my profile.

00101_2hl2gIOmt3w_1200x900.jpg


00303_7bHV0x7abFH_1200x900.jpg


01414_dPeirpzEoRA_1200x900.jpg


00B0B_4cDV41zllac_1200x900.jpg
 
Last edited:
I would be interested in the back parts of the frame rails with leaf spring perches..
 
I am interested in the windshield trim.
 
Plymouth67, can you post or send me a picture of the exact area you're looking for? That way I know what to cut and if it's shippable.

Sireland67, let me make sure I have a complete set for my Demon, I'll look tomorrow when I get back home.
 
813Demon340 said:
Plymouth67, can you post or send me a picture of the exact area you're looking for? That way I know what to cut and if it's shippable.

Sireland67, let me make sure I have a complete set for my Demon, I'll look tomorrow when I get back home.
Click to expand...

This complete area plus about 12 inches towards the axle. I dont need the trunk floor so you could drill the spot welds and sell it to somebody else.

20171118_201501.jpg
 
Your parts buddy..you let me know. I work in a fab shop and can make them it would just be easier this way. Let me know.
 
Let me know the shipping...let me know when ya get them out and we can settle up on the payment.
 
Ok,never hurts to ask.
I could get by with the one that runs down the drivers A pillar
 
Looking for splash shields behind the front tire. Runs between the front frame rail and the inner rocker panel. I would need these for both sides. Here is a picture.
splash sheild.jpg


Thanks.
 
Thanks for the pics. Looks like just surface rust from the pictures. I am interested in those. How much would you want?
 
Shakedownscott, whatever you think is fair + actual shipping. I can cut them tomorrow.

plymouth67, I got everything else cut out of the way, and will cut them tomorrow. Just to confirm you want the area cut that I painted yellow, which I highlighted in the 2nd pic?

IMG_1450Cut.jpg


IMG_1450.jpg
 
Status
Not open for further replies.
-

Back
Top