65 Barracuda w/500ci RB, Stage VI Max Wedge Port Heads, 6-speed, and 5.38 Dana
Split the floor to 7" above the firewall seam, beat the floor up, attached the scattershield, put a jack underneath the scattershield, and jacked up until the engine was slightly nose down. This helped to ensure I have the necessary room for the T56 when I'm ready for test fitting.
My next task is cutting the crossmember out for fabrication of the new one.
Split the floor to 7" above the firewall seam, beat the floor up, attached the scattershield, put a jack underneath the scattershield, and jacked up until the engine was slightly nose down. This helped to ensure I have the necessary room for the T56 when I'm ready for test fitting.
My next task is cutting the crossmember out for fabrication of the new one.
