Removing 68 Barracuda Dash Panel/Instrument Cluster Assembly

One of the steering column support studs has 2 nuts on it. Second one is only to secure ground wires. Anyway... Completely remove all 3 nuts. I'll remove the 3 bolts at firewall plate also. Column will practically fall in the seat. I have removed the steering wheel since that puller is on hand. That was back when I had the big *** OEM wheel.
You can access the climate controller bolts through the glove box opening with that liner removed. You would need a magnet or something sticky to hold the bolt in your socket.
I pull extra speedo cable length into the car so that cable attached serves as a helping hand but... some of what I do probably isn't necessary for all.
Some can lift out a seat and lay in the floor and reach up, etc... I cannot. What I can't do from on my knees at the door opening, I can do while sitting in the seats.