TTI headers and 3" summit exhaust
Long winded saying the same over and over.
Unless you work for tti, that would explain a lot, you really have no idea. I respect your opinion, but dont agree.
You dont have a jegs system, you dont know how it fits...obviously you aren't aware of the hardware that comes with then or the extra cross pupe,x or H, you can buy or add extra.
The pipes come out where they need and should come out, these cars didnt get 3" pipes factory and the factory hangers comparison is moot imo.
We can keep going back and forth with our opinions hoping people will take them as law or we can leave it where it should be and let others decide ....since we have already said plenty on the subject!
I certainly do not work for TTI.
I do have an idea and you should to if you have actualy looked at both,it does not require more than a few seconds even looking at pictures,even stewie wonder should be able to see the difference. since those systems are not even remotely close neither in design,routing or in the hardware,i never said anything regarding how they fit.The only similarity is that they all route exhaust gases from alitle forward of the torsionbar crossmember to somwhere close to the bumper.
This is not opinion its fact.
Here comes a couple links where you can take a look at pictures,not extremely detailed but certainly good enough for the purpose.
A Jegs system:
Jegs 2 1/2" exhaust reference pics
There is actaualy one thing about that system that i find superior to TTI´s design that is also present on Flowmasters offering for our cars, im sure you can figure out what that detail is with your grand knowledge,i will give you a couple tries to figure it out if you want to play that game.
Certainly not a bad system just cheaper and has a whole lot less finese to it compared to others but still does its job well as many owners know. i would be surprised if they are still made in USA for that price but still good.
A TTI exhaust for an abody with an H-pipe if you scroll down alitle
TTI Exhaust System | Moparts Question and Answer | Moparts Forums
Much different.
A Pypes system with an X-Pipe.
67-73 Mopar A-Body 2.5" Crossmember Back w/ X-Pipe System SMA10
Also a whole lot different.
And a and offering from Flowmaster that sadly seems to be alitle forgotten.
https://www.flowmastermufflers.com/...&year1=1968&model=300&submodel=78&engine=5353
I realy like this one actualy,darn shame im not a big fan of X or H pipes and certainly not a fan of flowmasters mufflers. But the tubing is routed very differently and i like the hangers.
As i have said in the past,its up to anyone to pick the system they like the best im not promoting any of them over another in general but they are all very different and its reflected in the price and thats not opinion that is fact.
