Red Headed Stepchild-75 Swinger LSX Swap

Nothing too crazy going on yesterday. I got my 6an to 4an reducer fitting in the mail finally so i can finish reducing the feed line down accordingly to feed the turbos. I also pulled all the turbos and stuff back out to do some touchup painting in the back from all the cutting and in and outs of the turbo setups. So i got all sanded down, primed and repainted. I also cleaned up the cuts and picked up some trim to go around the cuts to make it cleaner as the exhaust passes through. all my couplers for the 2.5" cold side pipes are in the mail and will be here next week, cold side pipes will be welded on Monday and should be ready to install with the blow off valves Tuesday. I'm also picking up some flexible exhaust pipe just to make sure the exhaust and waste gate dumps is aimed downward so i can get this thing tuned and to the exhaust shop to finish up afterwards.

I also was also able to run the alternator positive, and ecm/fuse panel positive and starter/starter relay positives all the way to the back of the car and get them tucked nice and neat under the carpet. So all that wiring is complete. I also ordered a new headlight retainer ring for the passenger side because the jb weld fix i performed didn't necessarily fix it. lol. luckily the jeeps run the same headlights and i was able to find a ring for $11 new shipped. So hopefully by next week everything is done with the exception of the tune.