Recommendations on new shop

My shop has 10x10 door. Car up on hoist you cant open door.you can,but have to be careful. 8 foot high door limits the vehicles that can get into shop.

Compressor inside shop, but plumb the air intake in from outside.huge noise reduction. If its in a closet it will get hot,and creates a lot of water issues.

Floor drain is a must. Wash bay? Sort of. No pressure washing,but garden hose is ok. I cant stress this enough, you need a good slope to drain. But only in the wash bay.

My concrete finisher didnt do as i asked and sloped from walls to sump. Toolbox against wall now leans and drawers will open if not fully closed.
A little slope in outside bays to middle hoist bay is ok.
And definetly middle bay for hoist. Setup is easier if there is sufficient room to walk around posts.
I got away from that by using a 4 post drive on.

Used oil burner would be nice.
In floor radiant and a makeup air unit is most efficient.

Office, restroom,parts room and electrical set up is a matter of preference,
I really like my led lights.