FYI, made contact with AMD via email that I have an NOS pair of 1969 Barracuda Fenders if they're so inclined to start making them. Mike (AMD) replied that he forwarded my email to their R&D and owner. We'll see.
AMD 2nd gen 1969 Barracuda Fenders
- Thread starter A56
- Start date
-
I did this thing years ago. All I ask for was two for one and if they could return the fenders or what was left of them. They said to me that they are not going to make 67 to 69 Barracuda fenders.
I actually offer them a whole bunch of nos parts and they did not want to the 2 for 1 thing that they can get rotted ones and get the part close. So we ended up with 70 and up trunk for, 70 and up interior floor, 73 and up torsion bar cross member and so on. It would have bin nice to get 68 69 stuff correct.
I offered them
fenders
header panel
full quarter notch, fast and convert style
trunk floor
trunk extension
interior floor
inner fenders
outer and inner wheel house
some used parts roofs, cowls fire wall, rockers and more
They said they would find rotted ones or get parts for free
GOOD Luck! We could use fenders for sure!
I actually offer them a whole bunch of nos parts and they did not want to the 2 for 1 thing that they can get rotted ones and get the part close. So we ended up with 70 and up trunk for, 70 and up interior floor, 73 and up torsion bar cross member and so on. It would have bin nice to get 68 69 stuff correct.
I offered them
fenders
header panel
full quarter notch, fast and convert style
trunk floor
trunk extension
interior floor
inner fenders
outer and inner wheel house
some used parts roofs, cowls fire wall, rockers and more
They said they would find rotted ones or get parts for free
GOOD Luck! We could use fenders for sure!
Last edited:
TheGrateRonzini
Well-Known Member
Wouldn’t it be nice if AMD would have considered it. A 250$ header panel (just a guess) that you don’t have to put a ton of hours into churching it up. Fenders you don’t have to combine several to make a decent one, notchback quarters that would make so many peoples lifes easier not having to stich a 5 ft butt weld. They will probably start popping all those goodies once ny car is done
67dodgedartconv
Well-Known Member
It would be nice if Dynacorn would build some replica 2nd gen cuda bodies & parts
Almost like trying to get Edelbrock to make more STR 12 cross rams. I did contact offenhauser about coming out with a crossram for 340's that would work with fiTechs.....still waiting.
-
