Headers for a original 1974 dodge dart 360 sport 4 speed

-
7

74 360 dart sport

Well-Known Member
Joined
Jan 24, 2019
Messages
537
Reaction score
258
Location
Montevideo Minnesota
Does anyone know if Doug's headers fit a 74 dart 360 it only shows to a 72 360 a body I talked to a representative at Doug's and he said that they have not verified to fit the 74 has anyone put Doug's headers on a 74 dart thank you new member
 
74 360 dart sport said:
Does anyone know if Doug's headers fit a 74 dart 360 it only shows to a 72 360 a body I talked to a representative at Doug's and he said that they have not verified to fit the 74 has anyone put Doug's headers on a 74 dart thank you new member
Click to expand...

There is no difference between a '72 and '74 in regards to motor/4 speed equipment that I know of, and a member here has installed a set on his 74 Duster (now a 71 Demon).

Pretty rare car, if it is original. Love to see pictures, but maybe in a welcome thread instead of here so we don't go off topic?
 
74 360 dart sport said:
Does anyone know if Doug's headers fit a 74 dart 360 it only shows to a 72 360 a body I talked to a representative at Doug's and he said that they have not verified to fit the 74 has anyone put Doug's headers on a 74 dart thank you new member
Click to expand...
They fit a 74 just fine. I have them on my 74 Duster 360, though it's an auto, not 4 speed. Fit much better than the generic stuff.
 
Fit great on my 74 Dart sport 340 4 speed with schumacher mounts slant to 340 but used a tti z bar or modify the stock one as described on this site.Had to modify mopar mini starter a bit.Everything is real close but it fits!!Tons of great info here!!!
 
I have no issues with my mini starter. I can actually pull it off and put it on without touching any bolts on the headers.
Here's a couple of pics too

duster 002.jpg


duster 004.jpg


duster 010.jpg
 
Only major difference as far as I know between 72 and 74 are the engine mounts style, steering linkage (center link) and k frame. 72 uses biscuit style eng and trans mounts, 74 uses the spool style. The corresponding k frames are also different. I dont beleive this will affect header fitment. My 75 360 (408) 4 speed Dart Sport with 74 k frame and mounts (and grill) used TTIs with no issues.

FB_IMG_1474308749649.jpg
 
Last edited:
You must log in or register to reply here.
-

Back
Top