Question 74 Duster Bench to bucket
If your going from bench to buckets, you will need to put body plugs in the old holes and drill 4 new holes. There are dimples in the floor board that mark the locations for the bucket seat holes. Here is a picture where you can make out the plugged bench seat holes and the new holes.
You will need to add plates on the inside holes to give the floor pan strength. The other holes are backed with braces that the bench used.
If your going from bench to buckets, you will need to put body plugs in the old holes and drill 4 new holes. There are dimples in the floor board that mark the locations for the bucket seat holes. Here is a picture where you can make out the plugged bench seat holes and the new holes.
You will need to add plates on the inside holes to give the floor pan strength. The other holes are backed with braces that the bench used.
