Cold-Case Review in a 66 Barracuda MOP751

66 CUDA said
If Cold Case is willing to pay for shipping and return shipping ( I want it back ) I have my original OEM 1966 Barracuda radiator sitting in my garage. The side mounting bracket on one side is loose but it should not interfere with what you will need to get your measurements correct. You can take your time and get what you need, I have no plans on using it in the near future.
Bob

My name is Len, I'm the guy Chris mentioned in his reply post. I started working with Chris and Brian at Cold Case to manufacture a direct fit drop in Cold Case radiator for the 67 thru 69 A bodies. It all started back in June of last year at the Syracuse Nationals. To give them measurements off of a factory radiator helps but it's not as good as them actually having a radiator to take all the measurements from. I gave Chris my original radiator so he could take it back with him after the Nationals. They sent it back to me a few weeks later in perfect condition except it was so old my car kept overheating. I received the prototype in early December and for being a early prototype this radiator is perfect. So I have a prototype radiator sitting in my 68 340 Dart GTS with a automatic tranny. The radiator fits like a glove and I was able to bolt up my OEM shroud to the radiator. The only small issue was the top of the shroud does not but up to the tank. I called Brian who is the manufacturing manager at Cold Case and told him about the small gap ( about 3/4 of a inch ) he explained that they couldn't duplicate the top tank. Not a issue, I took the radiator and shroud to a buddies fabricating shop and we fabricated a piece of tin to mount to the under side of the shroud to give it a clean look and it fits perfect up to the tank. We made two of these and I sent one to Brian so he can duplicate it and I'm sure if someone purchases a direct fit 67/69 radiator this piece will be included if someone is going to run a shroud. I do have photos but can't up load off this computer but I will post them. As far as the tranny lines go I had to bend one about a half inch with no problems the other fit perfect. The tranny line connectors on the radiator are in the correct spot as is the intake and outlet radiator hoses. All I can say is Cold Case ( Chris and Brian ) were fantastic to deal with and they truly do have a great radiator !