Still stalling after carb rebuild. ???

69FBCuda said
Default for the idle mix screw is 2 turns out up until 1969 then it is vacuum set to 14.2 to 1. Check the float level via the economizer diaphragm opening, should be 27/32th from the machined surface to the gas surface. Is the bowl vent operating lever missing?

Right now the idle mix is all the way right. I will turn out 2 as you suggest. I adjusted the float when rebuilding to the 3/16 the Mikes Carb kit stated. The bowl vent lever just hangs there by the idle screw and is not attached to anything. Is this correct?