Rebuilt 318 install problem

Well, I started fresh tonight and got TDC, on the compression stroke and everything lines up as it should but it will not start and is popping out the carb. I went to check spark at #1 spark plug wire since the gun (the second one I have) and I had no spark, I checked other wires and was not getting spark consistently. I checked the spark from the coil and it seems weak. I will be replacing the module and coil tomorrow. I don't know if this is my entire problem, but it is a start to hopefully get helps me get closer to the end.

Thank you all for your suggestions and comments and help

I will post updates until the problem is resolved.