1973 Dart 340 Sport Project
Thought I'd post this for anyone using the 26" Champion radiator. The radiator, when set in the stock location, sat up so high that I'd have to trim the hood support to get clearance. Instead of doing that, I did some measuring and cut out the bottom of the core support. I then used some 1/2 inch square tubing to lower the cut out piece enough to get clearance. You can see what I did in this photo, and also in the photo in the previous post. Just another way to get a larger radiator in there.
Thought I'd post this for anyone using the 26" Champion radiator. The radiator, when set in the stock location, sat up so high that I'd have to trim the hood support to get clearance. Instead of doing that, I did some measuring and cut out the bottom of the core support. I then used some 1/2 inch square tubing to lower the cut out piece enough to get clearance. You can see what I did in this photo, and also in the photo in the previous post. Just another way to get a larger radiator in there.
