SS Lancer
Well-Known Member
What suppliers are offering fender well headers for small block LA in above vehicle
1966 Dart Fenderwell Header info needed !!!
- Thread starter SS Lancer
- Start date
-
pishta
I know I'm right....
short answer: Hooker and Hedman (unlisted now IIRC), historically you could get Cyclones too as well as Eds.
SS Lancer
Well-Known Member
Thank you
Headman Race division is in Atlanta so I will call them monday thank you I would rather go with them the last set of Hookers I saw looked Like crap.
dibbons
Well-Known Member
Just for reference ('65 Valiant), here is what the Cyclone Headers look like (I cut the fender well on the passenger side a little too much). These are definitely not "equal length".
pishta
I know I'm right....
Ive got a set of cyclones hanging up if anyone wants some pics to knock off the design. Doesn't seem that difficult if you have a tube bender, no crazy equal length hooker bends.
SS Lancer
Well-Known Member
What about selling them ????
pishta
I know I'm right....
not at the moment, took me 10 years to find them. Ill post them up if I decide I don't need them.
Hooker Part #5208 semi fender well headers. I ran them on my Valiant for a while.
Hooker Headers 5208: Super Comp Headers Small Block Mopar 273-340 | JEGS
Hooker Headers 5208: Super Comp Headers Small Block Mopar 273-340 | JEGS
66340SEDAN
FABO Member #3649
I have a pair of vintage ones, can’t positively ID them, they might be for an early a-body but not positive, they were hanging in the barn for several years, they had a paper tag on them but when I cleaned off the barn dust the tags disintegrated. The ones I have have larger tubes and they much be race ones cause they don’t have a flange on the collector to bolt on exhaust....but one could be added. I’d sell them but the problem is I’m in Minnesota and I’m not sure how I would ship them. BTW, like your username, my name is Keith and I have 340’s too 
-
