9” or 10” clutch?

-
ReegDawg707

ReegDawg707

Active Member
Joined
Nov 6, 2017
Messages
27
Reaction score
6
Location
Ukiah,CA
1965 Dodge Dart 170, 225 Slant, 3/tree, my clutch my be going bad. Options for replacement include a 9” or 10” clutch is there a way to find out which one I have without dropping the trans? Thanks in advance!!

-Rigo A.
 
Your car most likely left the factory with a 9-1/4" Auburn clutch and pressure plate. If it has been replaced in the fifty plus years of it's life it probably got a stamped cover assembly. If you surface the flywheel you can put a 10" stamped cover assembly back in because of the way the replacement 10" units bolt up on a 122 tooth flywheel. Pull your inspection cover to confirm.
The Auburn assembly will look like this:
9auburn-plate.jpg
 
grimreaper said:
Your car most likely left the factory with a 9-1/4" Auburn clutch and pressure plate. If it has been replaced in the fifty plus years of it's life it probably got a stamped cover assembly. If you surface the flywheel you can put a 10" stamped cover assembly back in because of the way the replacement 10" units bolt up on a 122 tooth flywheel. Pull your inspection cover to confirm.
The Auburn assembly will look like this:
View attachment 1715284721
Click to expand...
Thank you so much!!
 
You must log in or register to reply here.
-

Back
Top