pilot bushing help

If the car was an automatic there's a decent chance the crankshaft wasn't drilled and machined for a pilot bushing. Use the measurements above to check, but if it wasn't drilled for a manual transmission there isn't a method for installing the standard pilot bushing short of having the crank drilled.

You can however use that roller bearing that was linked above, it fits into the outer register on the crank so it's ok if the original crankshaft wasn't drilled completely. You may also have to shorten the input shaft slightly, as it may interfere with the crankshaft if it wasn't drilled deep enough. You'll have to measure that depth and see if the input shaft will interfere.