early V8 exhaust manifolds

-
memike

memike

Super Moderator
Staff member
FABO Gold Member
Joined
Jan 8, 2006
Messages
55,706
Reaction score
28,989
Location
on the hill
Shooting myself for selling the ones I had :BangHead: but know I will need a good set, tell me what you have

Thank you , memike
 
Might be a good compromise between restrictive early A manifolds and headers.

Ever considered magnum manifold swap?

Just a suggestion.

Eric
 
prorac1 said:
Might be a good compromise between restrictive early A manifolds and headers.

Ever considered magnum manifold swap?

Just a suggestion.

Eric
Click to expand...
I am up for any subjection Eric, privet message sent
 
I’ve got a set for 75$ plus shipping. PM me if interested.

Jake
 
Valiant would be the same as a Barracuda, but I've never seen anything other than 340 HP manifolds or Magnum manifolds that will work on an early A....other than 64-66 manifolds. You are right, that the drivers side is restrictive because it has that dog leg in it on a 64-66 drivers side.
 
cosgig said:
What happened to the fenderwell headers, Mike?
Click to expand...
I am working on getting them in, I am thinking I will use the Hookers, I need to delete this post, I thought I did brother :popcorn:

555.jpg
 
FISHYPETE said:
An old set of 360 exhaust man. would work on a Barracuda. Less restriction than273. Or would a Vaiiant be different ?
Click to expand...
I have yet to see a set of any manifolds that will work, just the 273 man's will. Same as Barracuda, if you can show me or point me in a direction that would be cool Pete .

valiantwagonguy said:
I have some 64 - 66 273 exhaust manifolds.
Click to expand...
Hold tight, I am seeing if I can tackle these myself, if I can't I will be getting back to you :thumbsup: Thank you
 
I should make myself more clear. 360 exhaust man. Will fit on a 273 in my manual steering non power steering 4sp. Had that setup back in the day before I restored it to original. Hi Mike
memike said:
I have yet to see a set of any manifolds that will work, just the 273 man's will. Same as Barracuda, if you can show me or point me in a direction that would be cool Pete .

Hold tight, I am seeing if I can tackle these myself, if I can't I will be getting back to you :thumbsup: Thank you
Click to expand...
 
FISHYPETE said:
I should make myself more clear. 360 exhaust man. Will fit on a 273 in my manual steering non power steering 4sp. Had that setup back in the day before I restored it to original. Hi Mike
Click to expand...
I am running a 360 , 904, manual steering, I would love to see an old picture or the 360 manifolds that will work if you could point me in that direction Pete, I understand if you can't find anything :thumbsup:
 
Meant to say non power brakes. They were early ones because this was approx. 1976
 
Hey Mike, I searched for "273 with 340 manifolds". There are quite a few threads about this. Here's one that may help. Treblig's name came up as knowing what's going on with manifolds. He may be able to help.
273 with 340 exhaust manifolds
 
FISHYPETE said:
Meant to say non power brakes. They were early ones because this was approx. 1976
Click to expand...
, none power brakes here as well, if you do run across a picture can you put it in this thread please please Pete
 
AJ/FormS said:
Mike, I noticed you're not asking about 340 manifolds from Second gens; Do they not fit your early-A?
Click to expand...
I have been doing some reading and from what I have seen the second generation 340 will fit but it's much harder to get them to fit, still learning this myself
 
You must log in or register to reply here.
-

Back
Top