Universal Traction Bars install on a Duster....

I installed these traction bars many years ago and ironically they fit to a tee. I have another pair where they're not deep enough to go over the shock mount plate and wouldn't be long enough. I even seen a couple photos here where I'm not sure if they're long enough and actually hitting the center of the eye of the front mount for the spring. If it hits an inch or two back it could probably bend the spring. I know on mine I adjust about a half inch each away from touching to allow a little bit of travel on the street and very quickly get traction when I need it. I have SS Springs so the right side wants to hang down lower but I've welded another chunk of metal on top of it to raise the stop point in extra inch.

Also instead of having the hangers connected to the traction bar I use the hanger Mount as the clamp to clamp the front of the springs. So I have deceleration and safety protection and clamping at the same time.
of course everything to do with my car has to be old school first. I can hardly wait to get rid of the rims that's the only thing that makes me nuts now.
I'm very happy with them...