Oil Pan info needed for Early A

-

SS Lancer

Well-Known Member
Joined
Mar 15, 2013
Messages
4,513
Reaction score
3,674
Location
North Carolina
Does anyone have suggestions or part numbers for a good quality 7 or 8 qt oil pan that fits well with a small block in a 66 Model Dart
Thanks Chris.
 
You’ll have to modify the k frame for the milodon ones. I’m in the process of doing that right now.

Jake


Does anyone have suggestions or part numbers for a good quality 7 or 8 qt oil pan that fits well with a small block in a 66 Model Dart
Thanks Chris.

083EBC2B-1E7F-4A0D-9060-624DAF146CBA.png


DB9F2DAD-E422-47A7-B732-C42823A7F579.png


3CCB8ACA-566E-451A-87DE-2C814A23EA14.png


6927F179-7840-4AF3-BB78-6299CBA2D5E0.png
 
Are they any aftermarket K members for my 66 Dart ###
If so are they clearanced for after market oil pans.
I don’t believe so. I know you can modify the pan as it hits the corner of the stock frame or modify the frame. I chose the frame because I had one lying around.

Jake
 
@CPDave has the Milodon road race pan in his '66 Dart (aka the Zebradart)
It required a little trimming of the pan, but could have been accomplished by a little trimming of the K-frame.
A little meaning 2" x 1/4"

If you can afford to let the pan hang below the K, the Kevco might work.
 
I attempted to go with the milodon 30941 (408 stroker) but waited 3 months and it still wasn't ready to ship. Also as noted, you have to notch the k frame. Not to wild about that

I went with a kevko m302,it is a little deeper than stock and hangs down about an inch more. Nice pan - with traps and gate assembly. And of course, it is cheaper

IMG_0004.JPG


IMG_0009.JPG


IMG_0010.JPG


IMG_0011.JPG


IMG_0013.JPG
 
@CPDave has the Milodon road race pan in his '66 Dart (aka the Zebradart)
It required a little trimming of the pan, but could have been accomplished by a little trimming of the K-frame.
A little meaning 2" x 1/4"

If you can afford to let the pan hang below the K, the Kevco might work.
Need one for Super Stock class drag racing .
 
Of course the kevko pan is 5 quart pan and with big filter 6 quart capacity...
 
I have a kevko pan on my 408. Also did the k-member mod. It's ridiculously easy. I highly recommend doing it.

IMG_20170918_242201_528.jpg


IMG_20170918_211130_279.jpg


IMG_20170919_225914_752.jpg
 
I attempted to go with the milodon 30941 (408 stroker) but waited 3 months and it still wasn't ready to ship. Also as noted, you have to notch the k frame. Not to wild about that

I went with a kevko m302,it is a little deeper than stock and hangs down about an inch more. Nice pan - with traps and gate assembly. And of course, it is cheaper

View attachment 1715288701

View attachment 1715288702

View attachment 1715288703

View attachment 1715288704

View attachment 1715288705
Im using the same pan. I had to trim my K frame on my 65
 
-
Back
Top