What Headers fit best in Barracuda small block with powersteer

-

bruno

Well-Known Member
Joined
Mar 29, 2012
Messages
57
Reaction score
117
Location
melbourne Australia
IMG_3924.jpg
 
What year, looks like an early one. If it's 64-66, I recommend Doug's headers. 65'
 
BTW, early A body headers are expensive, hold onto your wallet! 65'
 
If there are significant differences between early and late Abody exhaust systems, this may not be helpful but I scored a pair of Doug's on an Autozone sale. With power steering/'73, they fit very well, only needed a minor dent near the steering box and a little to clear the torsion bar on the driver's side. IIRC, that's it.
 
If there are significant differences between early and late Abody exhaust systems, this may not be helpful but I scored a pair of Doug's on an Autozone sale. With power steering/'73, they fit very well, only needed a minor dent near the steering box and a little to clear the torsion bar on the driver's side. IIRC, that's it.
If there are significant differences between early and late Abody exhaust systems, this may not be helpful but I scored a pair of Doug's on an Autozone sale. With power steering/'73, they fit very well, only needed a minor dent near the steering box and a little to clear the torsion bar on the driver's side. IIRC, that's it.
thanks do you run a standard starter motor?
 
Hedman are hang low junk IMO

Run either Dougs or tti. Better fit with no tubes hanging under the steering linkage.

Run a mini starter, unless you want the gear reduction sound. I buy them at the boneyards on 1/2 off days. Some of the headers require it.
 
...
Run a mini starter, unless you want the gear reduction sound. I buy them at the boneyards on 1/2 off days. Some of the headers require it.

I'm running a mini starter too. Header clearance aside, it's cheap weight reduction. The stock starter has to weigh 2x what the mini starter does.
 
-
Back
Top