[Found!] Kickdown Rod for 4 bbl

-
Status
Not open for further replies.
K

KindredSpirit

Well-Known Member
Joined
Sep 1, 2015
Messages
80
Reaction score
33
Location
Petaluma, CA
Rating - 100%
2   0   0
Contact seller
Fellow A body members: I am looking for a 4 bbl kickdown rod from the throttle cable bracket to the carb throttle stud. The rod I need has the threaded adjustment area on the carb end. My measurement from the bellcrank mounting hole to the carb stud is approximately 11". This is a '71 340 Swinger with 727 AT. Thanks.
 
KindredSpirit said:
Fellow A body members: I am looking for a 4 bbl kickdown rod from the throttle cable bracket to the carb throttle stud. The rod I need has the threaded adjustment area on the carb end. My measurement from the bellcrank mounting hole to the carb stud is approximately 11". This is a '71 340 Swinger with 727 AT. Thanks.
Click to expand...

krazykuda said:
You can just lengthen the 2 bbl rod about 1 1/2" - 2" and get it to work...
Click to expand...


Read the second half of this article on how to set up a 4 bbl for info on how to lengthen the 2 bbl kick down rod to work with a 4 bbl...


How to set up a Holley 4 bbl for a Mopar
 
The pictures really help. Thank you. My existing rod is really in the wrong position even if it was longer. Maybe it's from a six. I am still looking for a rod with the angle toward the left valve cover as shown in these articles.
 
Status
Not open for further replies.
-

Back
Top