steering wheel ID

i have been going thru the same problem. I emailed Forever Sharp Steering Wheels and the told me that the co6 adapter for 1967 Mopars is 3.75" wide and the co2 is 4" wide. I also needed the lower bearing for the steering column. After searching FABO I found a tread about using a bronze bushing to replace the bearing. Unfortunately, the link for the bushing in no longer any good. after searching for an hour I found the one which is now not available from Amazon, at least for now. It is a flanged bronze bushing that has an od. of 1 3/8' an id. of 1" and is 1 3/4" long and cost $4.87 and works perfectly after sanding and polishing the steering shaft. Other are available, I just did not want to pay $20+. The links are below.

Another cheap steering column lower bearing

https://www.amazon.com/gp/product/B00IG7JSSY/?tag=joeychgo-20