Need Exhaust From Manifold To The Bumper for 225 Slant Valiant

-
1969_Valiant

1969_Valiant

Well-Known Member
Joined
Sep 18, 2010
Messages
100
Reaction score
6
Location
Philly, PA
Hi everyone. I hope all is well with you and your rides. Inspection has come up and I need a complete exhaust for my 225 slant Valiant, less the manifold. I'd like to keep the same diameter as the manifold so it doesn't get choked down. Can anyone recommend a system that is an easy bolt-on and is reasonably priced? Thanks for the help.
 
1969_Valiant said:
Hi everyone. I hope all is well with you and your rides. Inspection has come up and I need a complete exhaust for my 225 slant Valiant, less the manifold. I'd like to keep the same diameter as the manifold so it doesn't get choked down. Can anyone recommend a system that is an easy bolt-on and is reasonably priced? Thanks for the help.
Click to expand...

They sell repop pipe kits for slants?
News to me buddy....
 
Last edited:
MOPAROFFICIAL said:
They sell repop pipe kites for slants?
News to me buddy....
Click to expand...

Me too. And I've looked. Very recently.

Well, Accurate exhaust does, but I ain't payin THAT for a slant exhaust system.
 
toolmanmike said:
Too bad you can't order it up out of the Walker catalog.
Click to expand...

I got the Walker tail pipe but that's all they offer. I need it all. I am torn on whether trying to patch it until a 225 with a header makes it in or go ahead and take it to a muffler shop and let them replace the rest.
 
Found a few systems online for about $325 shipped. Another member messaged me also, so I have a few options. I'll figure out something.
 
Been looking for a system for my /6 Dart too. These are the two I came across.

1960-76 Dart/Challenger/Lncr/Swngr/Dem (6) cyl All Aluminized St [3760740101] - $247.00 : Zen Cart!, The Art of E-commerce

1967-1969 DODGE DART 6 CYLINDER SINGLE EXHAUST SYSTEM, 170 & 225 ENGINES | eBay

I email the ebay one and I believe it was 2" head pipe and 1.75 tail pipe. Think there was a Hot Rod article on the Accurate system and that it was 2.25 pipe all the way.

Local shop wanted $375 to bend something up and that was welding onto the existing pipe near the manifold. Keep us posted.
 
Thanks for the reply. Yes, they look like the 2 that I saw on the web. I'll report back and let you know what I decide to do.
 
I'm fortunate to have a local shop that still has the bend cards for my 63 Dart. They bent new ones for me for $250
 
You must log in or register to reply here.
-

Back
Top