Non Factory main bearing bolt torque.

I'm running the Mancini bolts and torquing them to stock spec. They're advertised as Mopar performance 340 360 bolts for a windage tray. I'm taking the advice of a lot of the replies I've gotten from this forum and I'm going to treat them as if they are stock. I was originally going to run a stock oil pan but I switched to the Kevko pan. My block was already machined and the final cleaning had been done so I didn't want to take it back to the machine shop and put studs in. But after talking to people on this forum I'm going to treat the bolts as if they are stock.