vivivivivibration

one thing is obviously different between my flywheel and the one in post 21,my FW has the hole drilled all the way thru.Can anyone tell me the orientation of the hole with the dampener.To be clear,if the FW is drilled at a certain degree off the offset bolt holes in the crank,then it should be lined up with a certain degree on balancer.If I had this info I would not need to remove FW to determine the hole orientation.I could simply set the balancer to the proper degree to coincide with the hole.i.e. if the flywheel hole is at 6:00 the balancer is at 84* atdc,for example.do you see where I,m going with this example? :soapbox: