Throttle cable

-
G

george joseph reid

Well-Known Member
Joined
Aug 22, 2018
Messages
207
Reaction score
202
Location
Deming New Mexico
Trying to get the cable hooked up but seems way to long. I think it is original to the car that was a slant 6. Low deck 400 with a Weiand dual plane, Holley and a 1 inch spacer. The bracket is to short for a good angle also, Looks like the one I have on my 68 R/R. What are you guys using? Will I also need the carb adaptor linkage also. Manual VB so not using a kick down. Thanks.
 
They sell aftermarket cables that can be cut to length. I had to use one on my early Cuda, very simple and straightforward. 65'
 
Mancini Racing has everything you need. I probably have it too if you are up this way in the near future. Are you dug out of the snow yet?
 
AndyF said:
Mancini Racing has everything you need. I probably have it too if you are up this way in the near future. Are you dug out of the snow yet?
Click to expand...
Thanks Andy,after 2ft it is melting pretty fast. I still need to get the trans in so that might help a bit. You up by Wilsonvile? I will bring what I have for a compare, would like to compare your build with mine. PM some info and I will set up a time. Any time is good for me.
 
You must log in or register to reply here.
-

Back
Top