Round coil bracket info needed

-
SS Lancer

SS Lancer

Well-Known Member
Joined
Mar 15, 2013
Messages
4,528
Reaction score
3,687
Location
North Carolina
Greetings - I'm horting up all the vintage new Accel round coils that I can find to use in Dart super Stock car . Im only buying the [Chrysler P3690560] or the Direct connection 140306 which seem to be shorter and larger in diameter than the conventional round coils ??? Isn't this correct if so who sales the correct brackets that are designed for these coils thanks for any info .
 
I think I have a mp bracket with the sleeve to go around the coil if I’m remembering right. Is that what ur looking for. Bought it in the mid 90s. Kim
 
oldkimmer said:
I think I have a mp bracket with the sleeve to go around the coil if I’m remembering right. Is that what ur looking for. Bought it in the mid 90s. Kim
Click to expand...
I have many new vintage round coils I will get some photos to you showing the difference etc thank you Chris.
 
Pics. Here is the bracket.Dont remember if there ever was a bolt. The resistor is out at my storage, will likely go out there later in the week. Kim

9E819B44-B7B8-4771-B9A4-807E956C6A4B.jpeg


E3A92F69-B044-4321-9345-850033A3C121.jpeg


D4B9B247-38B1-425D-A469-35BC8B31071D.jpeg


6C06ED74-0F49-43B2-86B5-79CC26C01B99.jpeg
 
oldkimmer said:
Pics. Here is the bracket.Dont remember if there ever was a bolt. The resistor is out at my storage, will likely go out there later in the week. Kim

View attachment 1715298281

View attachment 1715298282

View attachment 1715298283

View attachment 1715298284
Click to expand...
Ten 4
No rush
Do you happen to remember the ohms or part numer
oldkimmer said:
Pics. Here is the bracket.Dont remember if there ever was a bolt. The resistor is out at my storage, will likely go out there later in the week. Kim

View attachment 1715298281

View attachment 1715298282

View attachment 1715298283

View attachment 1715298284[/QUnumer

Ten 4 no rush do u happen to remember what ohms the resistor is ????
I have a many in general but looking for the 1/4 ohm units
Thanks Chris.
Click to expand...
 
Don’t know the part# offhand. I believe it’s the 1/4 ohm if I am remembering right. Does the bracke look like something u can use? Kim
 
As far as I can remember. I’m pretty dam sure it’s a MP part. It is with all my other Mopar Performance stuff from the 90s. I have fender covers from Direct Connection from the 80s. I did have a K frame and chassis headers also. Kim
 
oldkimmer said:
As far as I can remember. I’m pretty dam sure it’s a MP part. It is with all my other Mopar Performance stuff from the 90s. I have fender covers from Direct Connection from the 80s. I did have a K frame and chassis headers also. Kim
Click to expand...
Ten 4 thank you when u figure resistor out let me know thanks Chris

PS how much for fender covers
 
You must log in or register to reply here.
-

Back
Top