[FOR SALE] Edelbrock 1411 750

-
Status
Not open for further replies.
RustyRatRod

RustyRatRod

I was born on a Monday. Not last Monday.
FABO Gold Member
Joined
Jun 7, 2010
Messages
104,699
Reaction score
102,194
Location
Georgia
Rating - 100%
72   0   0
Contact seller
Edelbrock 1411 750 electric choke carburetor. I had this on my truck but it was too big so I swapped it out for something smaller. It ran fine, but it was just too big. It is a used carburetor and the price reflects that. No warranty expressed or implied. Simply selling because I don't have anything with a large enough engine to need it. Comes with fuel line and fuel pressure gauge. I am located in middle Georgia.

$175 plus shipping to the lower 48.

EDDY1411 2.jpg

EDDY1411.jpg
 
RustyRatRod said:
Edelbrock 1411 750 electric choke carburetor. I had this on my truck but it was too big so I swapped it out for something smaller. It ran fine, but it was just too big. It is a used carburetor and the price reflects that. No warranty expressed or implied. Simply selling because I don't have anything with a large enough engine to need it. Comes with fuel line and fuel pressure gauge. I am located in middle Georgia.

$175 plus shipping to the lower 48.

View attachment 1715299522
View attachment 1715299523
Click to expand...
Can you check if it fits in a USPS large flat rate box? If yes, I am interested. Shipping to 96817. Thanks
 
larsry said:
Can you check if it fits in a USPS large flat rate box? If yes, I am interested. Shipping to 96817. Thanks
Click to expand...

I don't have to check. It will fit. These will fit in a medium flat rat box, but I prefer the large because there is more room for packing. Some of the sides of the carburetor are right up against the side of the box in a medium box and are more subject to damage. Now, it will be a little more than the large flat rate price, because I add the amount of insurance same as the purchase price. They only come with 50 dollars. That's not enough to cover your purchase. It doesn't add much more to the total price at all. Shipping will be whatever the large flat rate is, plus a tad more for the added insurance.
 
dartfreak75 said:
Do you think this would be too big for a 360?
Click to expand...

Refresh my memory about your build. It will probably be about right. It was to big for my engine, because mine is box stock, right down to exhaust manifolds.
 
360 .030 over speed pro 116 pistons 9.5 scr lunati 702 cam ( 262 advertised 220 @.50 duration .475 .494 lift) headers and a factory cast iron 340 intake.
 
dartfreak75 said:
360 .030 over speed pro 116 pistons 9.5 scr lunati 702 cam ( 262 advertised 220 @.50 duration .475 .494 lift) headers and a factory cast iron 340 intake.
Click to expand...

Yes, I think it would work fine. That's way more motor than what I have in the truck.
 
RustyRatRod said:
Yes, I think it would work fine. That's way more motor than what I have in the truck.
Click to expand...
I have a 1850 Holley that needs a rebuild I was kinda wanting a ready to run carb just because I'm really nervous about breaking in a new cam with a carb that i rebuilt.
 
dartfreak75 said:
I have a 1850 Holley that needs a rebuild I was kinda wanting a ready to run carb just because I'm really nervous about breaking in a new cam with a carb that i rebuilt.
Click to expand...

Well this one runs. I am sure it will be fine for breaking in a cam but you need to understand, it will need to be tuned to your combo once that's done. That's up to and including re-jetting or changing metering rods and or springs. But it will run out of the box.
 
So does one of yall want this thing?
 
Status
Not open for further replies.
-

Back
Top