904 transmission pan gasket

RustyRatRod said
Seriously? Two nuts in the center of the crossmember hold the transmission mount. 4 bolts hold the crossmember in. Put a jack under the transmission, remove the aforementioned fasteners, remove the crossmember, then remove the two bolts that hold the transmission mount to the transmission then you are staring at the two phillips screws that hold the plat on. Remove those, remove the plate and replace the seal. reassemble in reverse order. Yikes?

Hey RustyRat I did this. Yikes because I have 3 ruptured vertebrae and being on my back is difficult for me. I did this and also replaced the speedo housing seals twice. I also replaced the pan with a new one. I oowered thru this but I can’t begin to tell you how painful it was for me. I still leak and yikes I don’t think I can do anymore right niw as much as I want to.