Does anyone know where to find,and the size of the flared nut that holds the manifolds to the head on a Slant Six?? I broke one off
Does anyone know where to find,and the size of the flared nut that holds the manifolds to the head on a Slant Six?? I broke one off
I think the stud broke off and they need the nuts. I have some used ones, but nothing new.
I have 2 slant rad.I got from O Reilly. No need to go to old car vendor.Thanks Guys. I found the flared bolt on McMaster Carr. I realized that I also have a broken washer, like the one to the right on the photo Cuda416 attached. Also, does anyone know where to get a radiator for a slant 6?? The bolts spaces are 21 1/4" side to side and 11 1/2 inches top to bottom bolts. I tried Classic Industries with no luck.
Thanks, I'll give Oeilly a shotI have 2 slant rad.I got from O Reilly. No need to go to old car vendor.
I tried O’Reillys online and they didn’t have it. Which OReillys do you use?Thanks, I'll give Oeilly a shot
Would you happen to have any of the washers laying around?Are you talking about the triangular shaped washers? If so, I’ve got a couple of dozen laying around
I’m looking for the cone shaped. I have to bolt the manifolds up. I’m also looking for a radiator. I looked at the O’Reilly website, but couldn’t find 63. And ideas on radiators?I don't think those nuts are the same. The stock ones are a cone shape. I will post a picture tomorrow. Not saying those won't work, they are just different.
Only rad. I found was Rock auto for 67 dart rad has core height of 17 3/8 in. which is probably taller than oem for your 63. ut might work, you just need to measure The width should be same, but yo might have to drill a few new monting holes. WHO hit the caps!!???? 63-6 a body should be same, 669 same, not saying a rad for a 70 duster will not work. I have bought slant rad new from O reilly for 71 duster, 79 volare in last 2 years. I had several 63-5 darts and cuda slant cars couple years back, and NOT sure what I did for rad back then.I’m looking for the cone shaped. I have to bolt the manifolds up. I’m also looking for a radiator. I looked at the O’Reilly website, but couldn’t find 63. And ideas on radiators?