1972 Duster Build with my Daughter
Rear window rebuild. We did the RH side a while ago. Here is how we did it....
Again the steamer works great for loosening up old window tinting film. A razor blade and it comes right off.
Remove the rear latch screws and spring holder on the back side.
Here is how far the thick foam comes down this side.
Some reference photos for later.
The thick foam stops at the upper bracket
Reference
Drill out the rivet in the lower front corner.
Gone.
The glass will side out of the channel.
Now time to clean it all up and remove the weatherstrip.
Rear window rebuild. We did the RH side a while ago. Here is how we did it....
Again the steamer works great for loosening up old window tinting film. A razor blade and it comes right off.
Remove the rear latch screws and spring holder on the back side.
Here is how far the thick foam comes down this side.
Some reference photos for later.
The thick foam stops at the upper bracket
Reference
Drill out the rivet in the lower front corner.
Gone.
The glass will side out of the channel.
Now time to clean it all up and remove the weatherstrip.
