PST 1.03 Bars

No problem! Sorry I was a little late to the show. :D

But yeah, as long as the LCA's aren't all the way at the bottom of their travel range when the bars are installed you should be ok. It's only when the larger bars are installed with the LCA's all the way at the bottom that problems come up with the ride height being too high.

Everything is back together and torqued, except the LCA pivot nuts and the front strut nuts.

I know the LCA pivot nuts need to be torqued with the suspension at ride height and with the wheels on the ground. What about the front strut nuts?

I've read it both ways (loaded and unloaded)