Resurrecting Mom's Duster
Ok folks quick update. Got the PRW 1.6 rockers and geometry correcting kit from Mike at B3 Racing Engines installed. While I was in there I also put in a Power Master alternator and a high volume water pump and thermostat and the leaking oil pump. Got her up and running. Took her out for a shake down cruise. Seems to run good, the oil pressure is better 25-30 @ idle and 50+ off idle with no leaks. The water temp is good, and when the fans come on I finally have 13+ volts at idle! Not going to get too excited yet but I am cautiously optimistic. A big shout out to Mike @B3RE for his patience and expertise. Great guy to work with. Also want to give a big shout out to Jesus, for His blessings on my life and giving me the patience and ability to enjoy this hobby.
Thank You Jesus!
Ok folks quick update. Got the PRW 1.6 rockers and geometry correcting kit from Mike at B3 Racing Engines installed. While I was in there I also put in a Power Master alternator and a high volume water pump and thermostat and the leaking oil pump. Got her up and running. Took her out for a shake down cruise. Seems to run good, the oil pressure is better 25-30 @ idle and 50+ off idle with no leaks. The water temp is good, and when the fans come on I finally have 13+ volts at idle! Not going to get too excited yet but I am cautiously optimistic. A big shout out to Mike @B3RE for his patience and expertise. Great guy to work with. Also want to give a big shout out to Jesus, for His blessings on my life and giving me the patience and ability to enjoy this hobby.
Thank You Jesus!
